Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2018-03-17 01:31:36
- clayer
- Contributor
- Registered: 2013-12-22
- Posts: 45
Issue with new versions past 0.0.7
On my Proxmark all versions after 0.0.7 can`t see a mifare card (says that found collision, card not found etc....) With 0.0.7 verison all ok. Maybe i need calibrate antenna?
Offline
#2 2018-03-17 07:16:28
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,536
- Website
Re: Issue with new versions past 0.0.7
0.0.7 ? thats an old firmware.
Try compiling / flashing latest source from Github and use 1-2cm distance between antenna and tag. Finding the sweetspot is different on each HF protocol, like 14a, 14b. 15 , iclass. Where 14a needs 1-2cm, 14b/legic needs closer to antenna, 15 is upto 6cm, iclass 1-3cm..
Also try making a stronger antenna, to see if that helps. hf voltages above 20v is good.
Offline
#3 2018-03-18 00:06:40
- clayer
- Contributor
- Registered: 2013-12-22
- Posts: 45
Re: Issue with new versions past 0.0.7
Already flashed, tried original and Iceman version.
No luck, antenna voltage is 14.5v
Offline
#4 2018-03-18 06:59:44
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,536
- Website
Re: Issue with new versions past 0.0.7
which pm3 device do you have?
Offline
#5 2018-03-18 16:21:02
- clayer
- Contributor
- Registered: 2013-12-22
- Posts: 45
Re: Issue with new versions past 0.0.7
got from taobao 3 years ago
on pm0.0.7 hf antenna is 11.7V. There is works OK
Last edited by clayer (2018-03-18 16:24:17)
Offline
#6 2018-03-18 17:20:28
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,536
- Website
Re: Issue with new versions past 0.0.7
Try to make antenna with better voltages?
Offline
#7 2018-04-25 22:15:01
- clayer
- Contributor
- Registered: 2013-12-22
- Posts: 45
Re: Issue with new versions past 0.0.7
Try to make antenna with better voltages?
where i can get manual for this?
Offline
#8 2018-04-26 04:28:50
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,536
- Website
Re: Issue with new versions past 0.0.7
there is a dedicated section here on this forum which is a good starting point and on the wiki there is some more info.
Offline
Pages: 1