Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
On my Proxmark all versions after 0.0.7 can`t see a mifare card (says that found collision, card not found etc....) With 0.0.7 verison all ok. Maybe i need calibrate antenna?
Offline
0.0.7 ? thats an old firmware.
Try compiling / flashing latest source from Github and use 1-2cm distance between antenna and tag. Finding the sweetspot is different on each HF protocol, like 14a, 14b. 15 , iclass. Where 14a needs 1-2cm, 14b/legic needs closer to antenna, 15 is upto 6cm, iclass 1-3cm..
Also try making a stronger antenna, to see if that helps. hf voltages above 20v is good.
Offline
Already flashed, tried original and Iceman version.
No luck, antenna voltage is 14.5v
Offline
which pm3 device do you have?
Offline
Try to make antenna with better voltages?
Offline
Try to make antenna with better voltages?
where i can get manual for this?
Offline
there is a dedicated section here on this forum which is a good starting point and on the wiki there is some more info.
Offline
Pages: 1