Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2014-02-18 09:00:55
- Bebeoix
- Contributor
- Registered: 2014-02-03
- Posts: 22
What is the kind of this RFID card ? PN533 doesn't recognize it.
Hi,
This card is a LF EM4100.
Last edited by Bebeoix (2014-03-08 20:41:49)
Offline
#2 2014-02-18 09:28:36
- app_o1
- Contributor
- Registered: 2013-06-22
- Posts: 247
Re: What is the kind of this RFID card ? PN533 doesn't recognize it.
Last time i checked, it was a LF EM410x.
But they might use dual frequency...
-To confirm...-
Offline
#3 2014-02-18 12:01:46
- Bebeoix
- Contributor
- Registered: 2014-02-03
- Posts: 22
Re: What is the kind of this RFID card ? PN533 doesn't recognize it.
Ok thanks.
And the PM3 fully support this kind ?
Do you know why the SCL3711 (PN533) can't detect it ?
Offline
#4 2014-02-18 12:06:15
- asper
- Contributor
- Registered: 2008-08-24
- Posts: 1,409
Re: What is the kind of this RFID card ? PN533 doesn't recognize it.
SCL3711 is a 13.56MHz product, EM4100 is 125kHz transponder.
Offline
#5 2014-02-18 19:30:17
- Bebeoix
- Contributor
- Registered: 2014-02-03
- Posts: 22
Re: What is the kind of this RFID card ? PN533 doesn't recognize it.
Ah ok thanks !
Too bad it seems the PM3 doesn't support the EM4100 :
https://code.google.com/p/proxmark3/wiki/RunningPM3#Supported_tag_types
So dump / clone / ... will not be possible I guess ?
Offline
#6 2014-02-18 19:33:58
- asper
- Contributor
- Registered: 2008-08-24
- Posts: 1,409
Re: What is the kind of this RFID card ? PN533 doesn't recognize it.
EM4100 is fully supported (also in emulation mode).
Please study PM3 documentation (unfortunately site documentation is quite old) but mainly forum sections before posting quite obvious questions 
Last edited by asper (2014-02-18 19:37:42)
Offline
#7 2014-02-19 23:30:59
- Bebeoix
- Contributor
- Registered: 2014-02-03
- Posts: 22
Re: What is the kind of this RFID card ? PN533 doesn't recognize it.
EM4100 is fully supported (also in emulation mode).
Please study PM3 documentation (unfortunately site documentation is quite old) but mainly forum sections before posting quite obvious questions
Yes EM4100 is read only, so it contain only an ID.
PM3 can read it. But does the PM3 can write this ID on another writable 125hkz card and act like a EM4100 ?
Offline
#8 2014-02-20 03:24:02
- app_o1
- Contributor
- Registered: 2013-06-22
- Posts: 247
Re: What is the kind of this RFID card ? PN533 doesn't recognize it.
If you are thinking of having free meal at those restaurants, that is probably a bad idea... 
Offline
#9 2014-02-20 09:03:14
- asper
- Contributor
- Registered: 2008-08-24
- Posts: 1,409
Re: What is the kind of this RFID card ? PN533 doesn't recognize it.
Again: please study PM3 documentation (unfortunately site documentation is quite old) but mainly forum sections before posting quite obvious questions.
Offline