Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
I just got my Proxmark3. I ordered two test cards and I'm testing with one. I went through these directions https://code.google.com/p/proxmark3/wiki/TagOps and everything seems to look good. If I do a lf read with the card on the antenna it shows different things than it nothing is on there, hw tune shows a difference if it is on there or not, etc. But stand alone mode never sees it. So I did more reading and I tried the command lf hid fskdemod. When I do that some led's turn on and it is looking for a card until I hit the button. But again, it never sees it. But if I hit the button and then do an lf read it seems to see it fine.
The device came with the svn 756 firmware. Because I'm having this issue I upgraded it to svn 838. The behavior is the same for both. So, what do you think is wrong or what am I missing?
Offline
Update, I think I figured this out. It seems I was sent 2 test cards that need the hf antenna and neither need the lf one. I got standalone mode to work with both cards with the hf antena. But I did see data that looked good to me with the lf with lf read, I don't get that. I need to play with it more.
Offline
IS THERE ANY ONE FROM PHOENIX ARIZONA
THAT CAN HELP ME WITH THE PM3 I be willing to pay wag ever is fare
If so email me at ..southwestsurplus@ymail.com
Or call me #480-818-7996
Best regards
BOBBY.
Offline