Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2013-05-02 16:42:16
- RadioWar
- Contributor
- From: China
- Registered: 2012-09-15
- Posts: 96
Just little bit change for Proxmark3[No AD]
Little modification on the original design
Offline
#2 2013-05-03 11:53:34
- vivat
- Contributor
- Registered: 2010-10-26
- Posts: 332
Re: Just little bit change for Proxmark3[No AD]
I have read at your wiki(http://wiki.radiowar.org/Proxmark3_Mod) that you modified:
1) Electrolytic capacitors to tantalum capacitors. Can you calculate a voltage difference between them using same antenna and hw tune command?
2) JTAG. Did you removed it completely? Or is it still on board? I can see 4 inputs.
3) Replacing the original IC. Did you replaced ARM with bigger one or what?
Offline
#3 2013-05-04 08:12:24
- RadioWar
- Contributor
- From: China
- Registered: 2012-09-15
- Posts: 96
Re: Just little bit change for Proxmark3[No AD]
Q1:about 10%voltage change
Q2:just like the photo
Offline
#4 2013-05-04 10:09:27
- vivat
- Contributor
- Registered: 2010-10-26
- Posts: 332
Re: Just little bit change for Proxmark3[No AD]
What JTAG do you use?
Offline
#5 2013-06-18 17:13:28
- RadioWar
- Contributor
- From: China
- Registered: 2012-09-15
- Posts: 96
Re: Just little bit change for Proxmark3[No AD]
What JTAG do you use?
JLINK~
Offline