Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Hello, greetings to the group, first of all I apologise for my bad English.
I am new to this, I have Proxmark3, my problem is that I want to clone a card, I have already scanned it and created a dump file, I managed to make the card work virtually, now I want to write a card from the dump folder there I get problems.
. Firstly, which card (there are thousands of cards) should I buy, and secondly, how do I write a card from the dump file. As far as I know it is a MIFARE Ultralight card, thank you in advance for your help.
[usb] pm3 --> hf mfu eload -f hf-mfu-040CE252BE$e81-dump-2.bin
[=] 255 blocks ( 1020 bytes ) to upload
[-] Error - can't find `hf-mfu-040CE252BE$e81-dump-2.bin`
[-] File: hf-mfu-040CE252BE$e81-dump-2.bin: not found or locked.
[?] Try `hf mfu sim -t 7` to simulate an Amiibo.
[usb] pm3 --> hf mfu sim -t 7
[=] Press pm3-button to abort simulation
[#] Emulator stopped. Trace length: 1400
[=] Done
[usb] pm3 --> hf mfu eload -f hf-mfu-040CE252BE4E81-dump-2.bin
[=] 255 blocks ( 1020 bytes ) to upload
[+] loaded 120 bytes from binary file hf-mfu-040CE252BE4E81-dump-2.bin
[=] detected new mfu dump format
[=] MFU dump file information
[=] -------------------------------------------------------------
[=] Version..... 00 00 00 00 00 00 00 00
[=] TBD 0....... 00 00
[=] TBD 1....... 00
[=] Signature... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[=] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[=] Counter 0... 00 00 00
[=] Tearing 0... 00
[=] Counter 1... 00 00 00
[=] Tearing 1... 00
[=] Counter 2... 00 00 00
[=] Tearing 2... 00
[=] Max data page... 14 ( 60 bytes )
[=] Header size..... 56 bytes
[=] -------------------------------------------------------------
[=] block# | data |lck| ascii
[=] ---------+-------------+---+------
[=] 0/0x00 | 04 0C E2 62 | | ...b
[=] 1/0x01 | 52 BE 4E 81 | | R.N.
[=] 2/0x02 | 23 48 00 00 | | #H..
[=] 3/0x03 | 00 00 00 00 | 0 | ....
[=] 4/0x04 | 18 21 12 12 | 0 | .!..
[=] 5/0x05 | 92 DC FF 00 | 0 | ....
[=] 6/0x06 | 02 00 00 21 | 0 | ...!
[=] 7/0x07 | 00 00 80 00 | 0 | ....
[=] 8/0x08 | 00 00 00 00 | 0 | ....
[=] 9/0x09 | 00 AA AA AA | 0 | ....
[=] 10/0x0A | 00 FF FF FF | 0 | ....
[=] 11/0x0B | FF FF FF FF | 0 | ....
[=] 12/0x0C | FE 00 00 00 | 0 | ....
[=] 13/0x0D | 00 00 00 00 | 0 | ....
[=] 14/0x0E | 00 00 00 00 | 0 | ....
[=] 15/0x0F | 00 00 00 00 | 0 | ....
[=] ---------------------------------
[=] MIFARE Ultralight override, will use 30 blocks ( 120 bytes )
[=] Uploading to emulator memory
[=] ...............................
[?] You are ready to simulate. See `hf mfu sim -h`
[=] Done!
[?] Try `hf mfu sim -t 7` to simulate an Amiibo.
[usb] pm3 --> hf mfu sim -t 7
[=] Press pm3-button to abort simulatio
--------------------------------------------------------------------------------
{
"Created": "proxmark3",
"FileType": "mfu",
"Card": {
"UID": "040CE252BE4E81",
"Version": "0000000000000000",
"TBO_0": "0000",
"TBO_1": "00",
"Signature": "0000000000000000000000000000000000000000000000000000000000000000",
"Counter0": "000000",
"Tearing0": "00",
"Counter1": "000000",
"Tearing1": "00",
"Counter2": "000000",
"Tearing2": "00"
},
"blocks": {
"0": "040CE262",
"1": "52BE4E81",
"2": "23480000",
"3": "00000000",
"4": "18211212",
"5": "92DCFF00",
"6": "02000021",
"7": "00008000",
"8": "00000000",
"9": "00AAAAAA",
"10": "00FFFFFF",
"11": "FFFFFFFF",
"12": "FE000000",
"13": "00000000",
"14": "00000000",
"15": "00000000"
}
}
Last edited by zule75 (2024-07-14 21:59:55)
Offline
Does no one have any information or suggestions on how to write the card?
Please help me
Last edited by zule75 (2024-08-04 13:03:45)
Offline
Pages: 1