Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
- Index
- » Introductions
- » Hello
Pages: 1
Topic closed
#1 2024-07-02 17:46:19
- tarek8577
- Contributor
- Registered: 2024-07-02
- Posts: 2
Hello
Hello from Germany
I have two Proxmark devices: one to send data and one to sniff and capture the data sent by the first device. I'm sending a 4-byte sequence, specifically '3FFE1FB6' using the function 'em4x70_send_bit' from em4x70.c soruce file , and using the lf sniff command on the second Proxmark to capture the signal.
I've uploaded a file containing the captured data for reference.
https://drive.google.com/file/d/19gSJr6ZxDC5qtyouoLgpiGNKbXes8ZA-/view?usp=drive_link
My problem is that I'm unable to demodulate the captured data to extract the original bytes ('3FFE1FB6') sent by the first Proxmark. Can someone help me with this issue?
Thank you.
Offline
#2 2024-07-02 18:27:58
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,536
- Website
Re: Hello
Welcome and thank you for reading the introduction post http://www.proxmark.org/forum/viewtopic.php?id=1125.
Your access rights has been updated.
Offline
Pages: 1
Topic closed
- Index
- » Introductions
- » Hello