Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2022-09-21 07:39:06
- Erictsk
- Contributor
- Registered: 2015-05-22
- Posts: 39
Tearing field in MIfare ultralight card
Hi guys, Something to check with you guys.
I am holding onto a ultralight card. I make a clone using proxmark. However, the cloned card is not able to open the door. Check the difference and noticed the "tearing" field are quite different.
I would like to check with you guys to know how should I or is it possible to update the tearing field of my cloned card.
The dump file for both cards are as follows :
Original card :
{
"Created": "proxmark3",
"FileType": "mfu",
"Card": {
"UID": "04194232AA7385",
"Version": "0000000000000000",
"TBO_0": "0000",
"TBO_1": "00",
"Signature": "0000000000000000000000000000000000000000000000000000000000000000",
"Counter0": "000000",
"Tearing0": "BD",
"Counter1": "000000",
"Tearing1": "BD",
"Counter2": "000000",
"Tearing2": "BD"
},
"blocks": {
"0": "041942D7",
"1": "32AA7385",
"2": "6E480800",
"3": "12070909",
"4": "24C3A4B4",
"5": "643D9A20",
"6": "C39639E7",
"7": "3BF7FE44",
"8": "56F1F4C6",
"9": "D283F4F5",
"10": "00000000",
"11": "00000000",
"12": "00000000",
"13": "00000000",
"14": "00000000",
"15": "00000000"
}
}
*****************************
Cloned card are as follows :
{
"Created": "proxmark3",
"FileType": "mfu",
"Card": {
"UID": "04194232AA7385",
"Version": "0000000000000000",
"TBO_0": "0000",
"TBO_1": "00",
"Signature": "0000000000000000000000000000000000000000000000000000000000000000",
"Counter0": "000000",
"Tearing0": "00",
"Counter1": "000000",
"Tearing1": "00",
"Counter2": "000000",
"Tearing2": "00"
},
"blocks": {
"0": "041942D7",
"1": "32AA7385",
"2": "6E480800",
"3": "12070909",
"4": "24C3A4B4",
"5": "643D9A20",
"6": "C39639E7",
"7": "3BF7FE44",
"8": "56F1F4C6",
"9": "D283F4F5",
"10": "00000000",
"11": "00000000",
"12": "00000000",
"13": "00000000",
"14": "00000000",
"15": "00000000"
}
}
Offline
#2 2022-09-22 03:54:28
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,537
- Website
Re: Tearing field in MIfare ultralight card
depends on your magic UL card... Some doesn't set those values.
Offline
#3 2022-09-22 08:38:46
- Erictsk
- Contributor
- Registered: 2015-05-22
- Posts: 39
Re: Tearing field in MIfare ultralight card
Thank you
depends on your magic UL card... Some doesn't set those values.
Offline