Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Hello,
I've a mifare ultralight. This tag work with a vending machine (Aztek badge)
I thought the uid was stored in the first block...
nfc-list -v
nfc-list uses libnfc 1.7.1
NFC device: ACS / ACR122U PICC Interface opened
2 ISO14443A passive target(s) found:
ISO/IEC 14443A (106 kbps) target:
ATQA (SENS_RES): 00 44
* UID size: double
* bit frame anticollision supported
UID (NFCID1): 05 2b 9b 93 f7 8a 41
SAK (SEL_RES): 00
* Not compliant with ISO/IEC 14443-4
* Not compliant with ISO/IEC 18092
Fingerprinting based on MIFARE type Identification Procedure:
* MIFARE Ultralight
* MIFARE Ultralight C
Other possible matches based on ATQA & SAK values:
ISO/IEC 14443A (106 kbps) target:
ATQA (SENS_RES): 00 44
* UID size: double
* bit frame anticollision supported
UID (NFCID1): 04 2f 77 42 a1 35 80
SAK (SEL_RES): 00
* Not compliant with ISO/IEC 14443-4
* Not compliant with ISO/IEC 18092
Fingerprinting based on MIFARE type Identification Procedure:
* MIFARE Ultralight
* MIFARE Ultralight C
Other possible matches based on ATQA & SAK values:
0 Felica (212 kbps) passive target(s) found.
0 Felica (424 kbps) passive target(s) found.
0 ISO14443B passive target(s) found.
0 ISO14443B' passive target(s) found.
0 ISO14443B-2 ST SRx passive target(s) found.
0 ISO14443B-2 ASK CTx passive target(s) found.
0 Jewel passive target(s) found.
xxd mycardUltra.mfd
00000000: 0000 0000 0000 0000 0000 0000 e110 7e00 ..............~.
00000010: 0300 fe00 0000 0000 0000 0000 0000 0000 ................
00000020: 0000 0000 0000 0000 0000 0000 0000 0000 ................
00000030: 0000 0000 0000 0000 0000 0000 0000 0000 ................
These blocks are not modified after a paiement.. always the same content....
What am i doing wrong ?
Thx
Offline
http://www.orangetags.com/wp-content/do … F0ICU1.pdf
Page 10
Block 0 + Block 1 + Block2 (0 byte).
Last edited by Monster1024 (2020-06-24 16:21:13)
Offline
Pages: 1