Proxmark3 community

zeroaphex

Contributor

Registered: 2018-07-18

Posts: 3

proxspace + github RRD/proxmark3 built fine, but no autopwn [solved]

If I try hf mf autpwn I get the below.

The firmware is
bootrom: master/v3.1.0-166-ge73c9f1-suspect 2019-12-11 02:54:19
os: master/v3.1.0-166-ge73c9f1-suspect 2019-12-11 02:54:43
fpga_lf.bit built for 2s30vq100 on 2019/11/21 at 09:02:37
fpga_hf.bit built for 2s30vq100 on 2019/11/13 at 14:52:19

The client is newly compiled in a fresh environment.

proxmark3> hf mf autpwn
help             This help
dbg              Set default debug mode
rdbl             Read MIFARE classic block
rdsc             Read MIFARE classic sector
dump             Dump MIFARE classic tag to binary file
restore          Restore MIFARE classic binary file to BLANK tag
wrbl             Write MIFARE classic block
auth4            ISO14443-4 AES authentication
chk              Test block keys
mifare           Read parity error messages.
hardnested       Nested attack for hardened Mifare cards
nested           Test nested authentication
sniff            Sniff card-reader communication
sim              Simulate MIFARE card
eclr             Clear simulator memory
eget             Get simulator memory block
eset             Set simulator memory block
eload            Load from file emul dump
esave            Save to file emul dump
ecfill           Fill simulator memory with help of keys from simulator
ekeyprn          Print keys from simulator memory
cwipe            Wipe magic Chinese card
csetuid          Set UID for magic Chinese card
csetblk          Write block - Magic Chinese card
cgetblk          Read block - Magic Chinese card
cgetsc           Read sector - Magic Chinese card
cload            Load dump into magic Chinese card
csave            Save dump from magic Chinese card into file or emulator
decrypt          [nt] [ar_enc] [at_enc] [data] - to decrypt snoop or trace
mad              Checks and prints MAD
ndef             Prints NDEF records from card
personalize      Personalize UID (Mifare Classic EV1 only)
proxmark3>

Last edited by zeroaphex (2020-06-28 04:14:24)

piwi

Contributor

Registered: 2013-06-04

Posts: 704

Re: proxspace + github RRD/proxmark3 built fine, but no autopwn [solved]

autopwn is not available in the official repository. You have to use the RRG fork at https://github.com/RfidResearchGroup/proxmark3

zeroaphex

Contributor

Registered: 2018-07-18

Posts: 3

Re: proxspace + github RRD/proxmark3 built fine, but no autopwn [solved]

Sorry all, I was compiling for the wrong version, now that I am, the firmware loads and all is working

iceman

Administrator

Registered: 2013-04-25

Posts: 9,537

Website

Re: proxspace + github RRD/proxmark3 built fine, but no autopwn [solved]

I suggest you edit your first post and the prefix [solved] to your title.