Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

Pages: 1

#1 2019-08-19 20:04:23

enis
Contributor
Registered: 2019-08-14
Posts: 5

Cloning not working Can't authenticate to block

Hello,

i have problem to create a dump file after receiving falid keys.

here my procedure by mac OS , xcode installed

step 1----------------
proxmark3> hw version
Prox/RFID mark3 RFID instrument         
bootrom: /-suspect 2015-11-04 22:15:34
os: /-suspect 2015-11-04 22:15:41
LF FPGA image built for 2s30vq100 on 2015/03/06 at 07:38:04
HF FPGA image built for 2s30vq100 on 2015/11/ 2 at  9: 8: 8
         
uC: AT91SAM7S512 Rev B         
Embedded Processor: ARM7TDMI         
Nonvolatile Program Memory Size: 512K bytes. Used: 171796 bytes (33). Free: 352492 bytes (67).         
Second Nonvolatile Program Memory Size: None         
Internal SRAM Size: 64K bytes         
Architecture Identifier: AT91SAM7Sxx Series         
Nonvolatile Program Memory Type: Embedded Flash Memory

step 2----------------------------       
proxmark3> hw tune

Measuring antenna characteristics, please wait...#db# DownloadFPGA(len: 42096)         
......#db# DownloadFPGA(len: 42096)         
.         
# LF antenna:  0.00 V @   125.00 kHz         
# LF antenna:  0.00 V @   134.00 kHz         
# LF optimal:  0.00 V @ 12000.00 kHz         
# HF antenna: 23.01 V @    13.56 MHz         
# Your LF antenna is unusable.   

step 3----------------------------       
proxmark3> hf search
         
UID : 45 bf d5 2a           
ATQA : 00 04         
SAK : 08 [2]         
TYPE : NXP MIFARE CLASSIC 1k | Plus 2k SL1         
proprietary non iso14443-4 card found, RATS not supported         
No chinese magic backdoor command detected         
Prng detection: HARDENED (hardnested)         

Valid ISO14443A Tag Found - Quiting Search

step 4------------------------------------       
proxmark3> hf mf chk *1 ? t
--chk keys. sectors:16, block no:  0, key type:?, eml:y, dmp=n checktimeout=471 us         
No key specified, trying default keys         
chk default key[ 0] ffffffffffff         
chk default key[ 1] 000000000000         
chk default key[ 2] a0a1a2a3a4a5         
chk default key[ 3] b0b1b2b3b4b5         
chk default key[ 4] aabbccddeeff         
chk default key[ 5] 1a2b3c4d5e6f         
chk default key[ 6] 123456789abc         
chk default key[ 7] 010203040506         
chk default key[ 8] 123456abcdef         
chk default key[ 9] abcdef123456         
chk default key[10] 4d3a99c351dd         
chk default key[11] 1a982c7e459a         
chk default key[12] d3f7d3f7d3f7         
chk default key[13] 714c5c886e97         
chk default key[14] 587ee5f9350f         
chk default key[15] a0478cc39091         
chk default key[16] 533cb6c723f6         
chk default key[17] 8fd0a4f256e9         

To cancel this operation press the button on the proxmark...         
--o         
|---|----------------|----------------|         
|sec|key A           |key B           |         
|---|----------------|----------------|         
|000|  000000000000  |        ?       |         
|001|  000000000000  |        ?       |         
|002|  000000000000  |        ?       |         
|003|  000000000000  |        ?       |         
|004|  000000000000  |        ?       |         
|005|  000000000000  |        ?       |         
|006|        ?       |        ?       |         
|007|        ?       |        ?       |         
|008|        ?       |        ?       |         
|009|        ?       |        ?       |         
|010|        ?       |        ?       |         
|011|        ?       |        ?       |         
|012|        ?       |        ?       |         
|013|        ?       |        ?       |         
|014|        ?       |        ?       |         
|015|        ?       |        ?       |         
|---|----------------|----------------|         
6 keys(s) found have been transferred to the emulator memory         

step 5--------------------------------         
proxmark3> hf mf nested 1 0 A 000000000000 d
Can't authenticate to block:  0 key type:A key:00 00 00 00 00 00           
proxmark3>


what i know, i have to figure out in which 'block' are the valid keys but i dont know with which command i can figure it out and after i have to create a 'dump' file by 'nested' command.Hello,

i have problem to create a dump file after receiving falid keys.

here my procedure by mac OS , xcode installed

step 1----------------
proxmark3> hw version
Prox/RFID mark3 RFID instrument         
bootrom: /-suspect 2015-11-04 22:15:34
os: /-suspect 2015-11-04 22:15:41
LF FPGA image built for 2s30vq100 on 2015/03/06 at 07:38:04
HF FPGA image built for 2s30vq100 on 2015/11/ 2 at  9: 8: 8
         
uC: AT91SAM7S512 Rev B         
Embedded Processor: ARM7TDMI         
Nonvolatile Program Memory Size: 512K bytes. Used: 171796 bytes (33). Free: 352492 bytes (67).         
Second Nonvolatile Program Memory Size: None         
Internal SRAM Size: 64K bytes         
Architecture Identifier: AT91SAM7Sxx Series         
Nonvolatile Program Memory Type: Embedded Flash Memory

step 2----------------------------       
proxmark3> hw tune

Measuring antenna characteristics, please wait...#db# DownloadFPGA(len: 42096)         
......#db# DownloadFPGA(len: 42096)         
.         
# LF antenna:  0.00 V @   125.00 kHz         
# LF antenna:  0.00 V @   134.00 kHz         
# LF optimal:  0.00 V @ 12000.00 kHz         
# HF antenna: 23.01 V @    13.56 MHz         
# Your LF antenna is unusable.   

step 3----------------------------       
proxmark3> hf search
         
UID : 45 bf d5 2a           
ATQA : 00 04         
SAK : 08 [2]         
TYPE : NXP MIFARE CLASSIC 1k | Plus 2k SL1         
proprietary non iso14443-4 card found, RATS not supported         
No chinese magic backdoor command detected         
Prng detection: HARDENED (hardnested)         

Valid ISO14443A Tag Found - Quiting Search

step 4------------------------------------       
proxmark3> hf mf chk *1 ? t
--chk keys. sectors:16, block no:  0, key type:?, eml:y, dmp=n checktimeout=471 us         
No key specified, trying default keys         
chk default key[ 0] ffffffffffff         
chk default key[ 1] 000000000000         
chk default key[ 2] a0a1a2a3a4a5         
chk default key[ 3] b0b1b2b3b4b5         
chk default key[ 4] aabbccddeeff         
chk default key[ 5] 1a2b3c4d5e6f         
chk default key[ 6] 123456789abc         
chk default key[ 7] 010203040506         
chk default key[ 8] 123456abcdef         
chk default key[ 9] abcdef123456         
chk default key[10] 4d3a99c351dd         
chk default key[11] 1a982c7e459a         
chk default key[12] d3f7d3f7d3f7         
chk default key[13] 714c5c886e97         
chk default key[14] 587ee5f9350f         
chk default key[15] a0478cc39091         
chk default key[16] 533cb6c723f6         
chk default key[17] 8fd0a4f256e9         

To cancel this operation press the button on the proxmark...         
--o         
|---|----------------|----------------|         
|sec|key A           |key B           |         
|---|----------------|----------------|         
|000|  000000000000  |        ?       |         
|001|  000000000000  |        ?       |         
|002|  000000000000  |        ?       |         
|003|  000000000000  |        ?       |         
|004|  000000000000  |        ?       |         
|005|  000000000000  |        ?       |         
|006|        ?       |        ?       |         
|007|        ?       |        ?       |         
|008|        ?       |        ?       |         
|009|        ?       |        ?       |         
|010|        ?       |        ?       |         
|011|        ?       |        ?       |         
|012|        ?       |        ?       |         
|013|        ?       |        ?       |         
|014|        ?       |        ?       |         
|015|        ?       |        ?       |         
|---|----------------|----------------|         
6 keys(s) found have been transferred to the emulator memory         

step 5--------------------------------         
proxmark3> hf mf nested 1 0 A 000000000000 d
Can't authenticate to block:  0 key type:A key:00 00 00 00 00 00           
proxmark3>


i dont know which command i can figure it out and after i have to create a 'dump' file by 'nested' command.


And id read and follow the instruction of http://www.proxmark.org/forum/viewtopic.php?id=1125 no solution still same problem.

Can you explain me what i did wrong or forward me to any topic where its detailed explained, step by step.

Thank you, please !

Offline

#2 2019-08-20 06:49:23

mwalker
Moderator
Registered: 2019-05-11
Posts: 318

Re: Cloning not working Can't authenticate to block

Interesting that key spread of all 00's.
Could you try the hardnested check as well

I note in the card detection : "Prng detection: HARDENED (hardnested)"
So might be worth a go.
hf mf hardnested 1 0 A 000000000000 d

Last edited by mwalker (2019-08-20 06:49:41)

Offline

#3 2019-08-21 13:06:46

piwi
Contributor
Registered: 2013-06-04
Posts: 704

Re: Cloning not working Can't authenticate to block

Your firmware is too old (from 2015) and requires an update to work with the current client software.

Offline

#4 2019-08-21 18:46:26

enis
Contributor
Registered: 2019-08-14
Posts: 5

Re: Cloning not working Can't authenticate to block

piwi wrote:

Your firmware is too old (from 2015) and requires an update to work with the current client software.


thx for reply, i will update it and try then again!

Offline

#5 2019-08-25 15:33:56

enis
Contributor
Registered: 2019-08-14
Posts: 5

Re: Cloning not working Can't authenticate to block

have problem at flashing, image not found !

macs-MacBook-Air:~ mac$ cd downloads
macs-MacBook-Air:downloads mac$ cd pm3-bin-v3_0_1/
macs-MacBook-Air:pm3-bin-v3_0_1 mac$ sudo ./flasher /dev/cu.usbmodem14201 -b ../bootrom/obj/bootrom.elf
Password:
sudo: ./flasher: command not found
macs-MacBook-Air:pm3-bin-v3_0_1 mac$ cd macOS/
macs-MacBook-Air:macOS mac$ sudo ./flasher /dev/cu.usbmodem14201 -b ../bootrom/obj/bootrom.elf
sudo: ./flasher: command not found
macs-MacBook-Air:macOS mac$ cd client/
macs-MacBook-Air:client mac$ ls
flasher        fpga_compress    proxmark3
macs-MacBook-Air:client mac$ sudo ./flasher /dev/cu.usbmodem14201 -b ../bootrom/obj/bootrom.elf
dyld: Library not loaded: /usr/local/opt/readline/lib/libreadline.7.dylib
  Referenced from: /Users/mac/Downloads/pm3-bin-v3_0_1/macOS/client/./flasher
  Reason: image not found
Abort trap: 6
macs-MacBook-Air:client mac$

Last edited by enis (2019-08-25 15:34:43)

Offline

#6 2019-08-25 20:17:35

iceman
Administrator
Registered: 2013-04-25
Posts: 9,537
Website

Re: Cloning not working Can't authenticate to block

and that would be a question to ask under the OSX category...  We tend to want our threads clean and to one subject here at the forum,  please follow that.

Offline

Pages: 1

Board footer

Powered by FluxBB