Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Topic closed
#1 2019-08-14 22:25:58
- zup
- Contributor
- Registered: 2019-08-14
- Posts: 7
Just bought a Proxmark3 RDV4.01 - wont recognise device
Hi there!
I just got my proxmark3 RDV4.01 (Iceman collection, with black antenna) at DefCon. I tried to use the standalone cloning functionality right away, (lights blinking correctly and stuff) but nothing happened when I tried to scan the card (Light D was still blinking). When I got home I tried to flash my device to the newest version from the RRG github repo. However, it is not recognising my device when specifying the correct path. (/dev/ttyACM0, or /dev/pm3-0). So I cant flash the device at all, or use the client to connect to it.
It did not work properly out of the box, and I cant upgrade firmware / reflash it, so what should I do from here? I have read all of the documentation I could find.
Offline
#2 2019-08-14 22:31:31
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,537
- Website
Re: Just bought a Proxmark3 RDV4.01 - wont recognise device
Welcome and I suggest you read http://www.proxmark.org/forum/viewtopic.php?id=1125 as an introduction.
Your access rights has been updated.
Offline
Pages: 1
Topic closed