Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Topic closed
Hello! I've bought a PM3 and I want to know these things:
1.
how to sniff the communication between a 125khz card and the reader
2.
how to deal with a ID card which does not have a typical freq.(200khz,500khz),because these special cards are common in china
3.
how does PM3 know if it's a t5577 card when the t5577 card has been configured as a em4100 card, because some reader can recognize it and give no access to it
4.
Can PM3 write data to F8262/8310 card to make it simulate the em4100 card, which is a function in most of the chinese cloner
5.
more infomation about the raw data
I hope I can get these things by searching in the forum and asking in the forum.
Thanks.
Offline
Welcome and I suggest you read http://www.proxmark.org/forum/viewtopic.php?id=1125 as an introduction.
Your access rights has been updated.
Offline
Pages: 1
Topic closed