Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2019-06-27 12:02:17
- sdr_herrmanns
- Contributor
- Registered: 2017-11-11
- Posts: 28
proxmark3 rdv4 with bt problem
hi, whatever i do pm3rdv4 is not popping up in windows except when i keep pressing the button.
led status:
blue 1111 red 0101
i have no idea why?
Offline
#2 2019-06-29 07:07:15
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,537
- Website
Re: proxmark3 rdv4 with bt problem
Tried another usb cable?
Failed a flash?
Offline
#3 2019-06-30 17:58:21
- sdr_herrmanns
- Contributor
- Registered: 2017-11-11
- Posts: 28
Re: proxmark3 rdv4 with bt problem
somehow strage, i need to keep pm3rdv4 button pressed then i see proxmark3 in device manager. but if i release the button it immediately disappears. on kali linux i still have trouble with flashing. that was in the past too (some usb device issue i guess). that's why i flash with windows and all the rest i do on kali. but this time even flashing doesnt work.
flashing will work only when i keep button pressed. for bootrom.elf it is required but for flashimage.elf i need to release the button. but this doesnt work because it disappears in device manager. really odd.
i do have another rdv4 but i have it at my holiday house. next time i'll try it with the other hw.
(i tried diff cables too)
Offline
#4 2019-06-30 18:37:16
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,537
- Website
Re: proxmark3 rdv4 with bt problem
sounds like the modem manager...
Offline
#5 2019-07-10 04:43:37
- blue-bird
- Contributor
- Registered: 2018-02-07
- Posts: 4
Re: proxmark3 rdv4 with bt problem
Hi!
blue 1111 red 0101
means hardware has half firmware.
Normally you can flash directly.
if you can't, you can press the button, and hold on the press, then replug the USB.
Hold on the button will force the COM port appear.
You should release the button after finished all flashing.
Offline