Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2019-05-18 15:00:17
- prox_students
- Contributor
- Registered: 2019-01-27
- Posts: 20
cp1000d
Hi,
Does anybody hold cp1000d by any chance?
Last edited by prox_students (2019-07-13 16:49:04)
Offline
#2 2019-05-21 00:45:14
- 0xFFFF
- Administrator
- From: Vic - Australia
- Registered: 2011-05-31
- Posts: 632
Re: cp1000d
I'm not sure where the 'D' comes from or if it differs from what I have. The encoder I use is an Omnikey 5427UE. If this device is no different from the cp1000d then perhaps I can help?
The hardware is certainly capable of re-programming iClass tags. I do this often using my own software and firmware.
It is not possible to create identical cards using the CP1000 as it is incapable of changing the UID.
Offline
#3 2019-05-31 15:07:41
- prox_students
- Contributor
- Registered: 2019-01-27
- Posts: 20
Re: cp1000d
Hi 0xFFFF,
Thanks for your input ! 'D' just indicates it's a desktop version, so it's identical to regular cp1000.
How are the software and firmware provided by HID? May I ask the reason why you are using your own firmware and software ?
And can I contact you via email? Unfortunately, I have no idea what your modhex address that you put on your profile is..
Thanks !
Last edited by prox_students (2019-07-13 16:49:36)
Offline
#4 2019-06-03 00:36:14
- 0xFFFF
- Administrator
- From: Vic - Australia
- Registered: 2011-05-31
- Posts: 632
Re: cp1000d
Oh OK. I suppose I have a 'D' version too then.
HID and the stupid naming conventions!
The CP1000 can read, program and re-program iClass or iClass SE (blank, configured or pre-programmed).
The software can be downloaded from the HID Drivers & Downloads page.
Can't recall if the firmware is contained within the AsureID installer or is downloaded by it. Either way, if you decompile it you can find out for yourself.
May I ask the reason why you are using your own firmware and software?
The software and hardware solutions offered today are woefully inadequate.
And can I contact you via email? Unfortunately, I have no idea what your modhex address that you put on your profile is..
Easy... decode it here: Card Info.
Thanks !
You're welcome 
Offline
Pages: 1