Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
I have a proxmark3 and have been trying to clone an AWID fob. I was able to read the original and clone it to a T5577 card. The card didn't work so when I got back to trying to figure it out the original fob wouldn't read on the pm3 anymore and neither would any LF fob or tag but card sized LF still read. Do I need to tune the antenna some how or adjust the config? Again it worked and than it didn't. HF still works fine,
Offline
If it's reading full size tags but not the smaller fobs it will most likely be an issue with antenna size and fob placement.
Try placing the fob closer to the edge of the lf antenna and not in the middle.
If that does not work try different positions and the lf detect each time.
Offline
This is the unit I have.
Is the a better LF antenna that would work with this and how would I switch it out?
Offline
Pages: 1