Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Hello all,
I am a bit new around here, but I keep on getting the following message:
Waiting for a response from the proxmark...
You can cancel this operation by pressing the pm3 button
It gets stuck there whenever I am running various lf search and hf search commands. If anyone could tell me what may be the reason I would greatly appreciate it. I just got the proxmark out of the box and I have been using the files downloaded from GitHub. I was told on another forum that I didn't need to flash the proxmark either.
#db# Prox/RFID mark3 RFID instrument
#db# bootrom: /-suspect 2016-11-09 00:59:56
#db# os: /-suspect 2016-12-08 12:45:38
#db# HF FPGA image built on 2015/03/09 at 08:41:42
#db# Modify by Willok(willok@163.com)
#db# proxmark3.taobao.com
Prox/RFID mark3 RFID instrument
uC: AT91SAM7S256 Rev C
Embedded Processor: ARM7TDMI
Nonvolatile Program Memory Size: 256K bytes. Used: 0 bytes ( 0%). Free: 262144 bytes (100%).
Second Nonvolatile Program Memory Size: None
Internal SRAM Size: 64K bytes
Architecture Identifier: AT91SAM7Sxx Series
Nonvolatile Program Memory Type: Embedded Flash Memory
proxmark3>
proxmark3> hw version
[[[ Cached information ]]]
Prox/RFID mark3 RFID instrument
uC: AT91SAM7S256 Rev C
Embedded Processor: ARM7TDMI
Nonvolatile Program Memory Size: 256K bytes. Used: 0 bytes ( 0%). Free: 262144 bytes (100%).
Second Nonvolatile Program Memory Size: None
Internal SRAM Size: 64K bytes
Architecture Identifier: AT91SAM7Sxx Series
Nonvolatile Program Memory Type: Embedded Flash Memory
Thanks in advance!
Offline
#db# Modify by Willok(willok@163.com)
You need to flash the newest official firmware. You can use the precompiled builds here:http://proxmark.org/forum/viewtopic.php?id=3975
I have been using the files downloaded from GitHub.
Never mix firmware and client versions!
Last edited by gator96100 (2018-07-31 00:28:07)
Offline
Which operating system are you using? There is a known issue with OSX (Mac OS) in combination with Qt. The only known workaround is to compile the client without graphic support.
Offline
Pages: 1