Proxmark3 community

gennaio

Contributor

Registered: 2018-02-26

Posts: 2

Hello

Hello,
i just got a Elechouse Proxmark3 v3

#db# Prox/RFID mark3 RFID instrument         
#db# bootrom: /-suspect 2015-04-02 15:12:04         
#db# os: /-suspect 2015-04-02 15:12:11         
#db# HF FPGA image built on 2015/03/09 at 08:41:42         
Prox/RFID mark3 RFID instrument         
         
uC: AT91SAM7S256 Rev B         
Embedded Processor: ARM7TDMI         
Nonvolatile Program Memory Size: 256K bytes. Used: 0 bytes ( 0%). Free: 262144 bytes (100%).         
Second Nonvolatile Program Memory Size: None         
Internal SRAM Size: 64K bytes         
Architecture Identifier: AT91SAM7Sxx Series         
Nonvolatile Program Memory Type: Embedded Flash Memory         

I tried to read in the forum and in various tutorials how to get started. As far as i understand i should update the firmare since it is outdate and specific version of the client works with specific versions of the client, in fact trying the latest client some commands work and some other don't. Can i update it using an official firmware or should i search for something specifically for Elechouse model? Will i be able to update using the latest client or should i look for another one?

Thank you

iceman

Administrator

Registered: 2013-04-25

Posts: 9,537

Website

Re: Hello

Welcome and I suggest you read http://www.proxmark.org/forum/viewtopic.php?id=1125 as an introduction.

You can now post your question in the relevant section.