Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Hi,
I think I followed all the correct procedures in the Proxmark3 wiki about updating the firmware. I was wondering if someone can confirm that everything look correct and up todate.
Prox/RFID mark3 RFID instrument
bootrom: master/v2.2.0-282-g3e50af4-dirty-suspect 2017-02-09 10:32:26
os: master/v2.2.0-282-g3e50af4-dirty-suspect 2017-02-09 10:32:30
LF FPGA image built for 2s30vq100 on 2015/03/06 at 07:38:04
HF FPGA image built for 2s30vq100 on 2015/11/ 2 at 9: 8: 8
uC: AT91SAM7S512 Rev B
Embedded Processor: ARM7TDMI
Nonvolatile Program Memory Size: 512K bytes. Used: 189121 bytes (36%). Free: 335167 bytes (64%).
Second Nonvolatile Program Memory Size: None
Internal SRAM Size: 64K bytes
Architecture Identifier: AT91SAM7Sxx Series
Nonvolatile Program Memory Type: Embedded Flash Memory
proxmark3> hw tune
Measuring antenna characteristics, please wait...#db# DownloadFPGA(len: 42096)
....
# LF antenna: 35.61 V @ 125.00 kHz
# LF antenna: 28.46 V @ 134.00 kHz
# LF optimal: 39.88 V @ 127.66 kHz
# HF antenna: 27.19 V @ 13.56 MHz
Displaying LF tuning graph. Divisor 89 is 134khz, 95 is 125khz.
proxmark3>
I appreciate the help, thanks!
Offline
Correct
Offline
Thanks!
Offline
Pages: 1