where can i find the 20091211 version compiled??

thefkboss · 2009-10-17 15:30:09

where can i find the 20091211 version compiled??
i´ve been looking, but i only find this pm3-20090905-r216.zip
thanks

cybergibbons · 2009-10-17 19:18:23

Would that not be the December 11 2009 release? Probably find it somewhere near the Delorean.

thefkboss · 2009-10-17 19:59:22

cybergibbons wrote:

Would that not be the December 11 2009 release? Probably find it somewhere near the Delorean.

read this:

https://www.lafargue.name/article2752.html

With the 20091211 version, here is what happens :
LED boot sequence now changed, C (red) lights up when boot code jumps from flash to RAM boot code, A (yellow) lights up after clocks have been initialized, B (green) lights up when jumping from boot code to main code, then D (red led away from the others) lights up while code is being downloaded to FPGA, then all leds turn off and board is ready for action.
With these changes the board now boots and is ready to use in about 3 seconds. Also since the USB bus is not initialized twice (once during boot, then again when the main code runs) unless the button is held down at boot, this seems to avoid the double USB connect and "USB device not recognized" when device is connected to the USB bus or software reset.

maybe he travel to the future

cybergibbons · 2009-10-17 20:15:51

That would be a typo - it should be the 20081211 version!

thefkboss · 2009-10-17 20:33:33

i think so but you never know.
may be ROEL knows

Proxmark3 community

Announcement

#1 2009-10-17 15:30:09

where can i find the 20091211 version compiled??

#2 2009-10-17 19:18:23

Re: where can i find the 20091211 version compiled??

#3 2009-10-17 19:59:22

Re: where can i find the 20091211 version compiled??

#4 2009-10-17 20:15:51

Re: where can i find the 20091211 version compiled??

#5 2009-10-17 20:33:33

Re: where can i find the 20091211 version compiled??

Board footer