Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Hi All,
I have just been given a Proxmark Device.
I'm following the steps for OS X from the GitHub wiki page.
I'm currently stuck when I try update the boot loader
[== Undefined ==]
richtea -> ./flasher -b ../../bootrom/obj/bootrom.elf
Loading ELF file '../../bootrom/obj/bootrom.elf'...
Loading usable ELF segments:
0: V 0x00100000 P 0x00100000 (0x00000200->0x00000200) [R X] @0x94
1: V 0x00200000 P 0x00100200 (0x00000b60->0x00000b60) [RWX] @0x298
Waiting for Proxmark to appear on USB...
Connected units:
1. SN: ChangeMe [020/008]
Found.
Entering bootloader...
(Press and release the button only to abort)
Waiting for Proxmark to reappear on USB..........................................................................................................................
I have tried restarting after installing dummy driver.
I am holding the button down for 5 seconds when inserting the Proxmark.
My Proxmark is getting reported as:
[== Undefined ==]
ProxMark-3 RFID Instrument:
Product ID: 0x4b8f
Vendor ID: 0x9ac4
Version: 0.01
Serial Number: ChangeMe
Speed: Up to 12 Mb/sec
Manufacturer: J. Westhues
Location ID: 0x14100000 / 19
Current Available (mA): 500
Current Required (mA): 500
Any help would be appreciated.
Offline
Did you use hid-flasher? What is the bootrom version you trying to flash?
Offline