Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2015-02-12 03:31:28
- Earman
- Contributor
- From: Vancouver, BC Canada
- Registered: 2015-01-20
- Posts: 45
Cheap casing for the Proxmark3
While visiting a friend in the USA, I found a really good plastic box to make a case for the Proxmark3.
It was only $1.99 at "The Countainer Store" (also available online). Reference # is 10054865. It's made out of soft plastic so it easy to cut ports with a cutter for the USB connections. I did not cut a port for the JTAG nor the button as it is easy easy to just open the lid for that... I attached the board with non conducting 3m double sided tape. Hope this may help someone!
Offline
#2 2015-02-12 09:34:25
- asper
- Contributor
- Registered: 2008-08-24
- Posts: 1,409
Re: Cheap casing for the Proxmark3
Not as good as a "professional" one but it can do the job! Thank you for sharing.
Offline
#3 2015-02-13 02:21:10
- Earman
- Contributor
- From: Vancouver, BC Canada
- Registered: 2015-01-20
- Posts: 45
Re: Cheap casing for the Proxmark3
Not as good as a "professional" one but it can do the job! Thank you for sharing.
I agree! But the pro ones where costing about US$29 + shipping to Canada almost doubling that price, so for $1.99 I found it a decent alternative, even though it definitely looks cheap and not professional! My idea was mainly to protect the board from static electricity:)
Last edited by Earman (2015-02-14 04:42:30)
Offline