Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
I've added two features to flasher...
firstly, 'fast' mode:
$ ./flasher
Usage: ./flasher {bootrom|os|fpga} image.s19 [f]ast
./flasher {both} osimage.s19 fpgaimage.s19 [f]ast
If you specify the 'f', it assumes the device is already up and running and in FLASH mode, so doesn't need a reboot. Since linux is quite slow at starting the PM3, this makes a huge difference to the time it takes to do a complete flash cycle.
The second option, 'both' will flash both the os and fpga in one cycle:
$ ./flasher both ../armsrc/osimage.s19 ../armsrc/fpgaimage.s19 f
Fastflash - device already in FLASH mode...
Waiting for Proxmark to appear on USB...
Found...
Flashing os...
expected = 0001a394 flush, c.ext1 = 0001a300
done.
Flashing fpga...
expected = 0000c474 flush, c.ext1 = 0000c400
done.
Have a nice day!
Offline
Pages: 1