Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2014-02-18 11:52:39
- asper
- Contributor
- Registered: 2008-08-24
- Posts: 1,409
T55x7 and EM4100 TOOL
Thanks to TissuePeanut here is an excel tool that is able to convert an EM4100 HEX ID (40 Bits) [or UNIQUE HEX ID] to blocks you need to write to a T55x7 hardware emulator; the tool is really easy:
1 - enter the EM4100 HEX ID in the appropriate field;
2 - modify hardware emulator parameters (options) by the drop-down coloured fields;
3 - copy/paste the HEX block0, block1 and block2 value to your T55x7 programmer !
Here is a screenshot:
I also added a "Descramble" sheet with EM4100 descrambling patterns we found here in the forum (look if your card printed values are here!):
Last sheet has the ATA5567 PDF manual embedded (just doubleclick on it to open):
You can download it HERE.
Last edited by asper (2014-10-14 13:09:44)
Offline
#2 2014-03-17 21:36:06
- asper
- Contributor
- Registered: 2008-08-24
- Posts: 1,409
Re: T55x7 and EM4100 TOOL
Added UNIQUE support (thanks to friend midnite!).
Last edited by asper (2014-03-17 21:36:13)
Offline
#3 2014-10-14 13:10:04
- asper
- Contributor
- Registered: 2008-08-24
- Posts: 1,409
Re: T55x7 and EM4100 TOOL
Added more descrambling patterns.
Offline
#4 2015-04-24 20:10:33
- holiman
- Contributor
- Registered: 2013-05-03
- Posts: 566
Re: T55x7 and EM4100 TOOL
Oh, that looks nice. Asper, could you send it to me ? I'd like to rip it off into a tool I'm working on...
Offline
#5 2015-07-13 16:43:39
- Lenox
- Contributor
- Registered: 2015-01-29
- Posts: 42
Re: T55x7 and EM4100 TOOL
The link is not available now.
Asper, can you upload it again?
Thanks
Last edited by Lenox (2015-07-13 17:38:55)
Offline
#6 2015-07-28 10:57:32
- rbubba1911
- Contributor
- Registered: 2014-08-14
- Posts: 86
Re: T55x7 and EM4100 TOOL
Hi,
From the xls I receive (thanks asper) , I made an OpenOffice version, with working macro.
you don't need no more Windows/Office2013 
Regards
Last edited by rbubba1911 (2015-08-19 15:46:55)
Offline
#7 2015-10-24 20:04:01
- Danz
- Contributor
- From: Dubai
- Registered: 2015-10-24
- Posts: 98
Re: T55x7 and EM4100 TOOL
Can I get copy ?
link not working .. thanks
Offline
#8 2015-10-29 14:45:32
- yikatong
- Contributor
- Registered: 2015-10-26
- Posts: 11
Re: T55x7 and EM4100 TOOL
Can I get a copy too?
The link seems to be outdated.
Offline
Pages: 1