Proxmark3 community

op333

Contributor

Registered: 2019-03-25

Posts: 2

New and Need help with with PM3 Easy / indala / T5577

I am new to the site and to RFID in general
I think I will need a LOT more reading and HELP but
I just bought and received a PM3 Easy (clone model I just learned)
So far, I was able to upgrade the bootloader and firmware
Prox/RFID mark3 RFID instrument         
[ ARM ]
bootrom: iceman/master/ice_v3.1.0-1077-g9fe651c9 2019-03-06 10:42:07
      os: iceman/master/ice_v3.1.0-1077-g9fe651c9 2019-03-06 10:42:11

Now I'm trying to clone a LF Indala card
but it isn't recognized with offline search command as valid known card.
However I get something when using the U option and it goes as follow
[-] no repeating pattern found         
PSK1 demoded bitstream:         
1011111010101111
1111111111111111
1111111110000101
1110110011001011
1011111010101111
1111111111111111
1111111110000101
1110110011001011
1011111010101111
1111111111111111
1111111110000101
1110110011001011
1011111010101111
1111111111111111
1111111110000101
1110110011001011
1011111010101111
1111111111111111
1111111110000101
1110110011001011
1011111010101111
1111111111111111
1111111110000101
1110110011001011
1011111010101111
1111111111111111
1111111110000101
1110110011001011
1011111010101111
1111111111111111
11         
Possible unknown PSK1 Modulated Tag Found above!

Could also be PSK2 - try 'data rawdemod p2'         

Could also be PSK3 - [currently not supported]         

Could also be NRZ - try 'data nrzrawdemod   

and although I can simulate the lf tag in memory or from trace file correctly onto another usb reader
I am still unable to program/clone it to a T5577 Card

Another strange thing is when I read it by using the official-64-20190324 GUI
without reflashing the PM3 Easy
It is able to read the tag as
proxmark3> lf indala read
BitLen: 64         
Indala UID=1010000000000000
0000000000000000
1111010000100110
0110100010000010
(a0000000f4266882) 

So I use the lf t55xx write b 0 d a0000000f4266882 command
and although it seems to write on the card, when I use
lf t55xx read b 0 override_safety page1
I get nothing, card is still blank

Now, I get that there might be a lot of things I don't do properly and my learning curve is a bit
steep but I would like a bit of help...
To start with, is the problem my lack of knowledge or my cloned version PM3 Easy
Would the trace file be of any help if I post it?

Iceman, since you might be the first one the read this please don't refer me to the FAQ right away
If you can spare two minutes i'd appreciate your input

iceman

Administrator

Registered: 2013-04-25

Posts: 9,537

Website

Re: New and Need help with with PM3 Easy / indala / T5577

If you did read the FAQ, you would have known this is the introduction.

Your access rights has been updated.