Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
hi Iceman , can you be kind to take a look at my issue? this is what I've done:
1. git pull...which folked on your main branch on git hub
2. make clean and make all
3. flash bootrom, and fullimage,
4. disable driver signature and download your specified .inf and installed it on the com3(existing PM3 port)
5. OK, now unplug PM3 and plugin and everything is fine, the driver is ok and PM3 is listed in device management present as com4
6. however issue comes... when I go to client folder and run ./proxmark3.exe com4, it stuck there and no respond any more and no 'PM3->' command prompt jump out, it stuck there...
7. but if I try flash the fullimage, it still could work out and flash successful and then back to 6 and stuck when I open the comport by run the exe file.
Can you help to guide how to resolve or debug this issue? I am running on Win10 x64 with the latest OS updates. thanks very much
Offline
can anyone help on this?
Offline
...sounds ok, but did you use Gator96100's proxspace? sounds like a mingw problem.
Offline
...sounds ok, but did you use Gator96100's proxspace? sounds like a mingw problem.
Yes, I use mingw .... do you mean it is an compile environment issue? and what is Gator96100, please kindly advise. thanks.
Offline
Gator96100 is the person who put a lot of work in to creating a portable environment for PM3 development. There is a link to it in the GitHub wiki here - ProxSpace-master.
Offline
so any solution for this?
Offline
try installing Gator96100's proxspace-master?
Offline