Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Topic closed
#1 2018-04-11 13:43:17
- UltrashRicco
- Contributor
- Registered: 2018-04-11
- Posts: 5
Hello from France !
Hi everyone, I am glad to join you after reading quite a bit from the forum.
I work for a company that specializes in bike-sharing, with bikes available from automated stations. User authentication is done through RFID cards + PIN code. We support many standards in the ISO 14443-A and B, and ISO 15693 families.
I got interested in the existing RFID technologies initially because we faced a situation in which we needed to be able to clone lost important cards with elevated privileges before blacklisting them. My electronics colleague suggested I looked into the vulnerabilities of Mifare Classic and unlocked chinese cards, which did the trick with a ACR122U reader and Kali.
Then I got interested in general RFID cloning or emulation and purchased a Proxmark3-easy, which I am playing with (no luck in emulating ISO 15693 tags so far though). I also purchased CUID Mifare Classic badges (or magic badges V2, the ones that can be written directly from the Mifare Classic Tools Android APP).
I hope I can contribute a couple of dumps and some thoughts!
Thank you all for the work and for sharing your experiences.
Regards!
Offline
#2 2018-04-16 05:49:51
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,537
- Website
Re: Hello from France !
Welcome and I suggest you read http://www.proxmark.org/forum/viewtopic.php?id=1125 as an introduction.
Offline
Pages: 1
Topic closed