Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2015-05-08 19:25:13
- Hobbes
- Member
- Registered: 2015-05-08
- Posts: 3
Problems flashing proxmark to newest firmware
New member and new to the proxmark - any help would be must appreciated
I having problems flashing my proxmark to the newest firmware the pm3-bin-2.0.0
Proxmark3 USB driver is installed correctly as I am able to go in the cmd side to fool around with the LF and HF commands
Here is my problem:
I can't get my Proxmark loaded with the newwest firmware.
Background:
Windows 7
I'm using the Flash - New Bootrom (use old flasher exe with -b option) and following the step by step pdf guide
All files are in the right directory (including the flasher and bootrom)
It gets stuck on the 3rd step - waiting for Proxmark to appear on USB and it never loads the new firmware.
Any fixes or a step by step tutorial for this?
Tried to scour the forum for an answer for this problem but didn't find one. Thanks for any help!
Offline
#2 2015-05-09 02:53:48
- marshmellow
- Contributor
- From: US
- Registered: 2013-06-10
- Posts: 2,302
Re: Problems flashing proxmark to newest firmware
What version are you on? You probably aren't so far back that you'd need the old flasher. (It is really old). hw ver should give you an idea how old your current fw is.
So you probably want the FLASH - Bootrom.bat. then (after it is done) hold the pm3 button and run the flash - os.bat (hold pm3 button until it is done)
Last edited by marshmellow (2015-05-09 02:54:58)
Offline