Proxmark3 community

AugustusF

Member

Registered: 2014-03-08

Posts: 5

Simulation libus0-dll:Error

Hi all,

Let my first start by saying i am a university student using the proxmark3 in my final project.

Currently i am investigating attacking, sniffing and cloning 125khz em4100 cards a relatively simple task with the proxmark in theory. Using the proxmark3 , the PCB antenna sold along side it and generic em4100 cards. I am capable of reading my cards using the lf read commands and the em4x commands however when ever i attempt to simulate or write to my blank cards i receive the following error and my client crashes.

writing failed: libus0-dll:erro [_usb_reap_async] timeout error
!
Trying to reopen device

In an attempt to help any advice i might receive my HW version is :

#db# Prox/RFID mark3 RFID instrument
#db# bootrom: svn 486-unclean 2011-08-28 18:52:03
#db# os: svn 651-suspect 2013-01-25 15:52:19
#db# FPGA image built on 2012/ 1/ 6 at 15:27:56

Thanks for your time in advanced.

vivat

Contributor

Registered: 2010-10-26

Posts: 332

Re: Simulation libus0-dll:Error

Did you try to flash latest svn?

AugustusF

Member

Registered: 2014-03-08

Posts: 5

Re: Simulation libus0-dll:Error

Hi vivat,

First let me apologize for the insane delay between my post and me getting back to you. Indeed flashing to the latest SVN completely solved this error for me.

Thanks for your help.