Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Hi guys, I think iv made a mistake in the flashing process because now all the device does it what looks like power cycle.
I used what i thought was the newest svn but after that flash it just seems to reset its-self. I can still flash it by holding the button in but i dont know if im flashing with the right image.
Can anyone help with this?
Offline
If you can still flash it then it is definitely not bricked. Even if you couldn't flash it by holding the button it still does not mean it is totally bricked.
Try checking out a previous revision, re-compile and re-flash your PM3. You should be fine.
Offline
thanks for the good news 0xFFFF is there a way to tell what version i should be putting onto it?
Offline
The last version I checked out and know to be working is r623.
There is no specific version you should be or shouldn't be using.
Offline
Pages: 1