Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
I have a RFID ISO14443B compliant to ISO14443B-2 but not full to ISO14443B-3.
The communication PCD->PICC is full ISO14443B-3 NZR, with Start of frame(10 etu 0 + 2 etu 1), start bit (0), end bit(1) and End of frame(10 etu 0).
Communication PICC->PCD BPSK hasn't Start of Frame, has start bit(0), end bit(1), every byte is sepated by 3 bit 1 and 5 pulse on BSPK for data. There is the End of Frame.
Last 2 byte not respect the separation with 3 bit 1 and 5 pulse it should ber CRC_B which is working.
0 | 0 0 0 0 0 1 0 1 | 1 1 1 5 pulse
0 | 1 0 0 1 0 1 0 1 | 1 1 1 5 pulse
0 | 0 0 1 0 0 0 1 0 | 1 1 1 5 pulse
0 | 1 0 0 1 0 0 1 0 | 1 1 1 5 pulse
0 | 0 1 1 0 0 1 0 1 | 1 2 pulse CRC_B byte 1
0 | 0 0 0 0 0 0 0 1 | 5 pulse CRC_B byte 2Is it a custom RFID or there is some standards for it? May be ISO14443B'?
Thank you for your suggestions.
Offline