Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2020-09-20 10:40:04
- wilecoyote
- Contributor
- Registered: 2020-09-08
- Posts: 2
MSD Standalone mode and reader commands
Hi all,
I've been using a slightly modified hf_msdsal to be able to read my card and extract track 2.
Then, in emulation mode the reader keep sending WAKEUP (0x52) but never send any command to the proxmark.
Did anybody know if timing issue can exist in the response of the proxmark to the WAKEUP ?
Thanks,
Offline
#2 2021-05-28 18:42:37
- Trouduc50
- Contributor
- Registered: 2020-07-18
- Posts: 3
Re: MSD Standalone mode and reader commands
Hello,
what modifications have you done to hf_msdsa? I seem to have the same issue.
Thanks
Offline
#3 2021-06-19 17:21:20
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: MSD Standalone mode and reader commands
Please do open an GH issue and explain what is the problem and how you solved it.
Offline
#4 2021-12-23 17:22:38
- kosgguy
- Contributor
- Registered: 2021-12-18
- Posts: 56
Re: MSD Standalone mode and reader commands
yes, paste the code here because the hf_msdsal original doesn't work.
Thanks
Offline
Pages: 1