Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2020-07-02 13:58:25
- niklasent
- Contributor
- Registered: 2020-07-02
- Posts: 7
High frequency sniffing - increase number of samples
Hello everyone,
using a Proxmark3 RDV 4 with the latest firmware and the client RRG/Iceman/master/v4.9237-540-g2abd7e08 2020-06-30 10:07:11, I tried to sniff the communication between my mobile phone as a NFC reader and a MIFARE Ultralight card.
To do so, I used the command hf sniff 10000 1 combined with data samples since this gives me useful traces most of the time.
However, when activating the reader mode on my mobile phone and holding it against the MIFARE ultralight card with the Proxmark listening to the communication, the sniffing process aborts shortly before the reader has finished the communication.
Moreover, the trace plot of the eavesdropped communication seems to be cut of at the last sample.
Is there a way to increase the number of samples, which the proxmark record swhile sniffing?
Best regards,
Niklas
Offline
#2 2020-07-21 09:08:51
- niklasent
- Contributor
- Registered: 2020-07-02
- Posts: 7
Re: High frequency sniffing - increase number of samples
Never mind, I see it is a limitation of the Proxmark itself.
Offline
#3 2020-07-21 09:26:06
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: High frequency sniffing - increase number of samples
...I suggest you use hf 14a sniff instead
Offline