Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2020-06-17 20:57:07
- 4ntcard
- Contributor
- Registered: 2020-05-24
- Posts: 9
Problems after running pm3 without deleting modemmanager
I don't know what happened to my RDV4. The case that I use without realizing it with modemmanager and now it doesn't work well at all.
After flashing it without modemmanager, the client is executed but instead of [db] Tracing for example now [#] Tracing is seen.
If I run "lf search" I get this message [#] Stack overflow detected! Please increase stack size.
Any suggestion please? I'm totally lost. Thanks. Sorry for my english.
Offline
#2 2020-06-17 21:07:25
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: Problems after running pm3 without deleting modemmanager
Seems like your bootloader is still ok.
Offline
#3 2020-06-18 01:06:28
- 4ntcard
- Contributor
- Registered: 2020-05-24
- Posts: 9
Re: Problems after running pm3 without deleting modemmanager
Thank you very much! it's still the same. The case that the flash is done well, with and without a button, but the operation goes the same. I will have to go thinking about buying a JTAG device and read tutorials on how to do it. All in all, tomorrow I will install the pm3 client from 0 and try to flash it from there.
Offline
#4 2020-06-18 07:59:46
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: Problems after running pm3 without deleting modemmanager
There seem to be several problems in on thread.
1. messed up flash, seems to be solved.
2. confusion about debug messages. They are now [#] we changed it.
3. stack overflow message, is a problem from the stack changes we are doing. I pushed a fix 10hours ago, so try pulling latest. And if you have issues with this, open a github issue instead.
Offline
#5 2020-07-04 13:24:43
- 4ntcard
- Contributor
- Registered: 2020-05-24
- Posts: 9
Re: Problems after running pm3 without deleting modemmanager
Hi. Sorry for not answering before. I'm still waiting for flashing-tool from lab401. The case, observing all the errors after the flash, I describe it:
lsusb
-Bus 001 Device 006: ID 9ac4: 4b8f J. Westhues ProxMark-3 RFID Instrument
hw status. Non-normal things:
After lf sampling config this appears:
[#] LF Sampling Stack
[#] Max stack usage ......... 3952/8480 bytes.
No flash has returned it to normal status. I hope to receive flashing-tool and with it to make it work correctly again. Thanks so much.
Offline