[requests] What would you like to see next on proxmark3 ?

Apt-Get · 2016-02-23 23:30:16

Ive tried this with many different tags and thresholds and always get the same result. This was tested with a good ioprox.

pm3 --> lf config t 40
#db# LF Sampling config:
#db# [q] divisor: 95
#db# [] bps: 8
#db# [d] decimation: 1
#db# [a] averaging: 1
#db# [t] trigger threshold: 40
pm3 --> lf se
#db# DownloadFPGA(len: 42096)
Waiting for a response from the proxmark...
Don't forget to cancel its operation first by pressing on the button
command execution time out
Reading 30000 bytes from device memory

Data fetched
Waiting for a response from the proxmark...
Don't forget to cancel its operation first by pressing on the button
Samples @ 0 bits/smpl, decimation 1:0
Unpacking...
Unpacked 30000 samples
NOTE: some demods output possible binary
if it finds something that looks like a tag
False Positives ARE possible

Checking for known tags:

No Known Tags Found!

pm3 -->

marshmellow · 2016-02-24 00:04:34

hmmm looks like someone added a timeout in the lf search ...

it appears you'd have to run:
lf read

once tag was read:
data samples
lf search 1

for the threshold to work currently...

add it to the list...

Last edited by marshmellow (2016-02-24 00:09:09)

Tooms · 2016-04-26 20:58:15

For the next hardware version, i like to see..

* On/off power button, so i dont have to pull out the usb kabel when it locksup or just dont work

* Some input/output pins to add external sensors there can be used by the proxmark3 lua code, like be able to connect color light sensors to the pins for detecting when external rfid kaypad it having an red/green led, sound sensor for beeps

* UHF range 8xxmhz(or some thing) for both the US and EU range

just some ideas....

marshmellow · 2017-02-24 07:26:10

EM4x05 full read/write/password can be crossed off..

iceman · 2017-02-24 08:23:58

Better late than never. I've scratched it out for you.

masterix · 2017-04-04 00:37:33

T55x7 password sniffing with a man in the middle attack

marshmellow · 2017-04-04 00:49:29

That is fully possible. As long as you can manually demod the snoop.

lohcm88 · 2017-04-04 01:23:13

Time stamping in proxmark log file... It is a pain searching for past records..

Last edited by lohcm88 (2017-04-04 01:23:33)

iceman · 2017-04-04 16:41:03

@lohcm88, if you look at my fork, I've a timestamp part commented out from the code. The logfile looks like crap when its enabled but thats what you are looking for. I think it was in client/util.c "addtologfile"

piwi · 2017-04-05 06:45:28

Or have a look at AddLogCurrentDT() in client/util.c and make use of it. In official repository too.

Dot.Com · 2017-04-05 12:30:30

lohcm88 wrote:

Time stamping in proxmark log file... It is a pain searching for past records..

I told you they have it on already :X

piwi · 2017-04-05 13:45:10

No, it is not directly available to end users. But it is only a few lines of code away...

Navster · 2017-09-18 08:05:15

A mobile version

Jk123 · 2018-04-17 14:35:02

Hello,

I was curious that just by using send command., can we perform below communication?

R: 26 => Welcome (REQA) (or use WUPA = 0x52)
T: 44 03 => Respond (ATQA)
R: 93 20 => Select cascade 1 (SEL)
T: 88 04 34 74 cc => CT, UID(byte 1,2,3), BCC
R: 93 70 88 04 34 74 cc 0e 05 => Select available tag (SEL)
T: 24 d8 36 => Select Acknowledge (SAK)
R: 95 20 => Select cascade 2 (SEL)
T: e1 e3 1c 80 9e => UID(byte 4,5,6,7), BCC
R: 95 70 e1 e3 1c 80 9e b9 e1 => Finish select (SEL)
T: 20 fc 70 => SAK without cascade bit set
R: e0 50 bc a5 => Request Answer to Select (RATS)
T: 06 75 77 81 02 80 => ATS (DESFire EV1)
R: 50 00 57 cd => Disable (HALT)

If not, It would be great to see that in proxmark3 by just having simple command to send above communication.

Regards,
Jk123

marshmellow · 2018-04-18 04:40:28

@Jk123 Please don't double post. The hf 14a raw cmd is what you are looking for.

cds333 · 2019-04-18 05:45:29

A standalone keyring- The ability to program a number of UIDs in via the console that can then later be used in standalone mode, and the ability to save all the UIDs read in standalone mode into the onboard memory for later use from the console.

Last edited by cds333 (2019-04-19 22:16:40)

cds333 · 2019-05-06 07:07:15

The ability simulate user data/memory as well as UID.

Last edited by cds333 (2019-05-06 07:11:52)

PlayGround · 2019-05-09 12:43:48

I would like to see some more banking releated cards(EMF Specification): Card Scheme, Card Number, Card Expiration Date:
the full public readable part. i wonder because my mobile app can read this, i could not get this information with proxmark.

the girogo card was fine too, i believe it is the same like above, but not sure. i can provide sample-datasets if needed.

iceman · 2019-05-12 10:00:56

have you tried the new EMV commands?

PlayGround · 2019-05-27 13:35:09

@iceman did not tried them right now, will do so :-D haven't realized that they are available

theguy · 2019-08-21 20:53:06

Two things:

An "until-terminated" long time search flag

lf search F (F is for FOREVER, or at least until someone halts it with ctrl+C/ctrl+D/pressing pm3 button)

The "hf search" wish listed above.

A combined "search" command that cycles through lf search and hf search.

The FOREVER flag on a combined "search" command would be so useful.

For example:
pm3 > sea F

And now my proxmark3 just searches and searches, sometimes finding valid cards and never stopping until I tell it to.

theguy · 2019-08-31 00:05:55

Huge feature:

2.4Ghz RFID antenna and commands

Rosco · 2020-05-21 02:27:18

A command line argument to prevent the client from logging anything (log or history, or creating a .proxmark3 directory in the home directory) would be nice. The only way to do that now is to unset HOME, so it doesn't know where to create the files/directory.

Last edited by Rosco (2020-05-21 02:48:36)

Proxmark3 community

Announcement

#51 2016-02-23 23:30:16

Re: [requests] What would you like to see next on proxmark3 ?

#52 2016-02-24 00:04:34

Re: [requests] What would you like to see next on proxmark3 ?

#53 2016-04-26 20:58:15

Re: [requests] What would you like to see next on proxmark3 ?

#54 2017-02-24 07:26:10

Re: [requests] What would you like to see next on proxmark3 ?

#55 2017-02-24 08:23:58

Re: [requests] What would you like to see next on proxmark3 ?

#56 2017-04-04 00:37:33

Re: [requests] What would you like to see next on proxmark3 ?

#57 2017-04-04 00:49:29

Re: [requests] What would you like to see next on proxmark3 ?

#58 2017-04-04 01:23:13

Re: [requests] What would you like to see next on proxmark3 ?

#59 2017-04-04 16:41:03

Re: [requests] What would you like to see next on proxmark3 ?

#60 2017-04-05 06:45:28

Re: [requests] What would you like to see next on proxmark3 ?

#61 2017-04-05 12:30:30

Re: [requests] What would you like to see next on proxmark3 ?

#62 2017-04-05 13:45:10

Re: [requests] What would you like to see next on proxmark3 ?

#63 2017-09-18 08:05:15

Re: [requests] What would you like to see next on proxmark3 ?

#64 2018-04-17 14:35:02

Re: [requests] What would you like to see next on proxmark3 ?

#65 2018-04-18 04:40:28

Re: [requests] What would you like to see next on proxmark3 ?

#66 2019-04-18 05:45:29

Re: [requests] What would you like to see next on proxmark3 ?

#67 2019-05-06 07:07:15

Re: [requests] What would you like to see next on proxmark3 ?

#68 2019-05-09 12:43:48

Re: [requests] What would you like to see next on proxmark3 ?

#69 2019-05-12 10:00:56

Re: [requests] What would you like to see next on proxmark3 ?

#70 2019-05-27 13:35:09

Re: [requests] What would you like to see next on proxmark3 ?

#71 2019-08-21 20:53:06

Re: [requests] What would you like to see next on proxmark3 ?

#72 2019-08-31 00:05:55

Re: [requests] What would you like to see next on proxmark3 ?

#73 2020-05-21 02:27:18

Re: [requests] What would you like to see next on proxmark3 ?

Board footer