Proxmark3 community

proxcat

Contributor

Registered: 2008-11-28

Posts: 62

Website

Re: Winter '10 - test release

The version of firmware running on your proxmark is out of sync with the windows client you are using.

cup

Member

Registered: 2010-06-11

Posts: 4

Re: Winter '10 - test release

final edit:

I've addressed all of my problems now.  Thanks again, cat.

(i was also leaving out a part of the command when trying: lf em4x em410xread)

Last edited by cup (2010-06-25 14:58:54)

Huuf

Member

Registered: 2008-10-27

Posts: 2

Re: Winter '10 - test release

I found a problem in the snooper.exe, it uses the old command, hi14asnoop and not the new hf 14a snoop and hi14alist instead of hf 14a list

So it gives infinite errors in a loop. Until you quit the application.

It is fixed in the latest snooper.c

Last edited by Huuf (2011-01-24 16:49:48)

joes

Member

Registered: 2011-10-28

Posts: 2

Re: Winter '10 - test release

Hey im having same problems as robisen does... Anyone has an answer on that? I had to register just to bump this thread to find an answer on that

0xFFFF

Administrator

From: Vic - Australia

Registered: 2011-05-31

Posts: 632

Re: Winter '10 - test release

Hi joes,

I'm working on step-by-step instructions for each OS. But for now...
For Proxmark users planing on developing under Windows I suggest you do the following:

• Download (and install) 7-ZIP from here: http://www.7-zip.org/download.html

• Download (and install) TortoiseSVN: http://tortoisesvn.net/downloads.html

• Download ProxSpace-20100226-r390.7z from: http://code.google.com/p/proxmark3/downloads/list

• Once downloaded, move (if required) ProxSpace-20100226-r390.7z to wherever you want to keep your Proxmark project.

• Assuming you installed 7-ZIP using all of the default options, you should have 7-ZIP context menu items.

• Right-click ProxSpace-20100226-r390.7z and select 7-Zip > Extract Here

• Assuming you installed TortoiseSVN using all of the default options, you should have subversion context menu items.

• Go in to the newly created ProxSpace folder and right-click the pm3 folder. Select SVN Update

...and finally...

In the ProxSpace folder there should be a file called runme.bat. You will need to modify 'MYPATH'. Eg.
If your 'ProxSpace' folder path is 'C:\ProxMark\ProxSpace' use the following: 'set MYPATH=%~d0\ProxMark\ProxSpace'
Run 'runme.bat'.

Hope this helps.

Regards,

-0xFFFF

joes

Member

Registered: 2011-10-28

Posts: 2

Re: Winter '10 - test release

Hi joes,

I'm working on step-by-step instructions for each OS. But for now...
For Proxmark users planing on developing under Windows I suggest you do the following:

• Download (and install) 7-ZIP from here: http://www.7-zip.org/download.html

• Download (and install) TortoiseSVN: http://tortoisesvn.net/downloads.html

• Download ProxSpace-20100226-r390.7z from: http://code.google.com/p/proxmark3/downloads/list

• Once downloaded, move (if required) ProxSpace-20100226-r390.7z to wherever you want to keep your Proxmark project.

• Assuming you installed 7-ZIP using all of the default options, you should have 7-ZIP context menu items.

• Right-click ProxSpace-20100226-r390.7z and select 7-Zip > Extract Here

• Assuming you installed TortoiseSVN using all of the default options, you should have subversion context menu items.

• Go in to the newly created ProxSpace folder and right-click the pm3 folder. Select SVN Update

...and finally...

In the ProxSpace folder there should be a file called runme.bat. You will need to modify 'MYPATH'. Eg.
If your 'ProxSpace' folder path is 'C:\ProxMark\ProxSpace' use the following: 'set MYPATH=%~d0\ProxMark\ProxSpace'
Run 'runme.bat'.

Hope this helps.

Regards,

-0xFFFF

Yah that is gr8... i appreciate that and i believe others as well

peace...joes