Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2018-12-03 08:14:22
- KinnyAdelaide
- Contributor
- From: Adelaide, South Australia
- Registered: 2018-12-03
- Posts: 13
HID Prox Tag details does not match
Hi all,
I'm new here. I tried looking at other posts but could not find something that answers my question.
First of all, this is my hardware and firmware.
Prox/RFID mark3 RFID instrument
bootrom: /-suspect 2015-11-19 10:08:02
os: /-suspect 2015-11-19 10:08:09
LF FPGA image built for 2s30vq100 on 2015/03/06 at 07:38:04
HF FPGA image built for 2s30vq100 on 2015/11/ 2 at 9: 8: 8
uC: AT91SAM7S512 Rev A
Embedded Processor: ARM7TDMI
Nonvolatile Program Memory Size: 512K bytes. Used: 169916 bytes (32%). Free: 354372 bytes (68%).
Second Nonvolatile Program Memory Size: None
Internal SRAM Size: 64K bytes
Architecture Identifier: AT91SAM7Sxx Series
I've been trying to close this original card. (Unique ID replaced so I won't get into trouble for)
HID Prox TAG ID: 2100cd259a (1234) - Format Len: 34bit - FC: 101 - Card: 1234
When I try to clone with another HID card, I get this:
HID Prox TAG ID: 2100cd259a (1234) - Format Len: 37bit - FC: 204 - Card: 332367
Notice, the format length, checksum and card numbers at the end does not match with the original card?
I am puzzled, please enlighten me.
Cheers!
Offline
#2 2018-12-03 08:30:30
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: HID Prox Tag details does not match
Have you tried the latest source code from Github? Your device looks like you are running a older firmware.
Offline
#3 2018-12-03 13:09:58
- KinnyAdelaide
- Contributor
- From: Adelaide, South Australia
- Registered: 2018-12-03
- Posts: 13
Re: HID Prox Tag details does not match
im trying to update the firmware using windows as linux gave me a harder time. i am trying to install the beta inf straight from the beta release but it wouldnt let me probably the driver is a 32bit version. i tried the "pm3-bin-756 (cdc+lua)" version, i can install it but it seeks libusb0.dll. i then move the files from the beta to this same folder and it would finally let me get to the bootrom.elf. Problem is that it keeps looking for pm3 and never finds it.
Offline
#4 2018-12-04 12:52:45
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: HID Prox Tag details does not match
,.... now that is even older... Download latest source from Github, compile / flash....
Offline