Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2018-04-19 19:14:59
- fidel
- Contributor
- Registered: 2016-10-17
- Posts: 28
how to detct T5577
Hi,
I have different fobs, from different supplier, they claim they are T5577.
I can Read and write on them, but when I do: "lf t55 detect" I get this:
pm3 --> lf t55 det
Modulation : ASK
Bit Rate : 5- RF/64
Inverted : No
Offset : 0
Block0 : 0x00148040
My Question is why I can not see the Chip type in this Detection.
Thank you for taking the time to answer.
Offline
#2 2018-04-19 19:38:36
- marshmellow
- Contributor
- From: US
- Registered: 2013-06-10
- Posts: 2,302
Re: how to detct T5577
try
lf t55 infohowever, there are only very minor differences around several lf chips that are inter-compatible. unless you have some intimate knowledge of these chips it is unlikely you could prove a chip is what they suggest it is.
Offline
#3 2018-04-19 19:43:16
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: how to detct T5577
lf t55 detect
is used for detection of the possible configuration of the t55xx tag. Not to identify the tag chipset.
Offline
#4 2018-04-20 17:55:56
- fidel
- Contributor
- Registered: 2016-10-17
- Posts: 28
Re: how to detct T5577
Thanks to both of you Gentlemans
Cheers
Offline
Pages: 1