Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2018-03-09 03:07:57
- bishop9
- Contributor
- Registered: 2016-03-31
- Posts: 10
Writing to t5577 tag not working reliably after firmware upgrade
For a while I used an older firmware that came with the proxmark3 and I never bothered to upgrade it. It worked fine when writing HID tags and some others. Ever since I upgraded to the latest firmware its been very difficult to write to tags.
When running the "lf hid clone XXXXXXXX" command, for example, I typically have to spam the command over and over again so I can get a Write. With the older firmware it would just take me one try, with the new one it takes sometimes 20-30 times of sending the command so that it finally writes.
Anyone else experiencing this? Is there any setting I need to change for it to write as reliably as before?
This is the version im using:
Prox/RFID mark3 RFID instrument
bootrom: master/v3.0.1-306-g9e40bad-suspect 2018-02-08 21:40:00
os: master/v3.0.1-306-g9e40bad-suspect 2018-02-08 21:41:55
LF FPGA image built for 2s30vq100 on 2015/03/06 at 07:38:04
HF FPGA image built for 2s30vq100 on 2017/10/27 at 08:30:59
uC: AT91SAM7S512 Rev B
Embedded Processor: ARM7TDMI
Nonvolatile Program Memory Size: 512K bytes. Used: 199885 bytes (38). Free: 324403 bytes (62).
Second Nonvolatile Program Memory Size: None
Internal SRAM Size: 64K bytes
Architecture Identifier: AT91SAM7Sxx Series
Nonvolatile Program Memory Type: Embedded Flash Memory
Offline
#2 2018-03-09 06:47:35
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,538
- Website
Re: Writing to t5577 tag not working reliably after firmware upgrade
do you remember which version of the firmware you had which had better LF support?
Offline
#3 2018-03-09 11:10:48
- bishop9
- Contributor
- Registered: 2016-03-31
- Posts: 10
Re: Writing to t5577 tag not working reliably after firmware upgrade
do you remember which version of the firmware you had which had better LF support?
I am not sure, I bought it from Rysc in March 2016 and I believe the firmware was from late 2015. So I think 2.2.
Thanks
Offline