Proxmark3 community

lime1

Contributor

Registered: 2015-04-17

Posts: 26

Re: Hacking on Farpointe/Pyramid 26 bit, need encoding help

Removed

Last edited by lime1 (2015-07-20 12:22:27)

hkplus

Contributor

Registered: 2015-01-07

Posts: 127

Re: Hacking on Farpointe/Pyramid 26 bit, need encoding help

If you feel the need for it, you are much welcome to add it to the source code.

Would anyone be willing to add the code for $200?  Or show me how to clone manually for $200?

You can contact me at: gm121@hotmail.com

Thanks

I could just clone or send you a sample tag with any number you want on it.  I use custom made programming software to make tags.

Last edited by hkplus (2015-06-25 21:45:18)

lime1

Contributor

Registered: 2015-04-17

Posts: 26

Re: Hacking on Farpointe/Pyramid 26 bit, need encoding help

Removed

Last edited by lime1 (2015-07-20 12:22:01)

lime1

Contributor

Registered: 2015-04-17

Posts: 26

Re: Hacking on Farpointe/Pyramid 26 bit, need encoding help

Thank you to everyone who worked on this and solved the checksum issue, updated the proxmark code and those who helped me.  I finally worked out how to clone this card.

I have a question though that I hope someone can help me with:
I realize for the 26 bit card discussed in this thread, block 0 is programmed as 80107000.  How about for the 90 bit card? 

I have checked the thread "T55x7 and Tags Emulation" (http://www.proxmark.org/forum/viewtopic.php?id=1767) but can't understand which bits of the block 0 would need to be changed between a Pyramid 26 bit & 90 bit tag?

Last edited by lime1 (2015-07-21 06:25:00)

lime1

Contributor

Registered: 2015-04-17

Posts: 26

Re: Hacking on Farpointe/Pyramid 26 bit, need encoding help

I realize for the 26 bit card discussed in this thread, block 0 is programmed as 80107000.  How about for the 90 bit card?

Having looked into this more, I think I confused the bit length with clock rate.  So it seems block 0 doesn't need to be changed for different bit lengths - it remains at 80107000. 

Doing a lf search for the original card & my t55xx cloned card shows the same results:

[== Undefined ==]
Pyramid ID Found - BitLength: 90 -unknown BitLength- (38xxx), Raw: 0001c10101013
bxxxxxxxxxxxxxxxxxx
Checksum xx passed

Valid Pyramid ID Found!

iceman

Administrator

Registered: 2013-04-25

Posts: 9,538

Website

Re: Hacking on Farpointe/Pyramid 26 bit, need encoding help

usually you set number of blocks that the t55xx will repeat as output in the config block.  But if its working for you, then don't.

hkplus

Contributor

Registered: 2015-01-07

Posts: 127

Re: Hacking on Farpointe/Pyramid 26 bit, need encoding help

Thank you to everyone who worked on this and solved the checksum issue, updated the proxmark code and those who helped me.  I finally worked out how to clone this card.

I have a question though that I hope someone can help me with:
I realize for the 26 bit card discussed in this thread, block 0 is programmed as 80107000.  How about for the 90 bit card? 

I have checked the thread "T55x7 and Tags Emulation" (http://www.proxmark.org/forum/viewtopic.php?id=1767) but can't understand which bits of the block 0 would need to be changed between a Pyramid 26 bit & 90 bit tag?

With Wiegand, there is no such thing as a Pyramid 90 bit tag.  Wiegand formats in Pyramid go to a max of 64 bits.  If there are more bits than this, then you might be looking at an ABA emulation tag (track II magstripe data).

Last edited by hkplus (2015-10-26 05:16:01)

trazodone

Contributor

Registered: 2015-11-25

Posts: 50

Re: Hacking on Farpointe/Pyramid 26 bit, need encoding help

If you feel the need for it, you are much welcome to add it to the source code.

Would anyone be willing to add the code for $200?  Or show me how to clone manually for $200?

You can contact me at: gm121@hotmail.com

Thanks

I could just clone or send you a sample tag with any number you want on it.  I use custom made programming software to make tags.

Hello,

I am interested to your custom made programming software. I have Pyramid information read from key fob as below details
Pyramid ID Found - BitLength: 26, FC: 150, Card: 194 - Wiegand: 12c0184, Raw: 00010101010101010101015261070889
Checksum 89 passed

Is it possible to clone using your software?
Answer here or send me email hydrorigs@outlook.com will be appreciated.

Thanks

hkplus

Contributor

Registered: 2015-01-07

Posts: 127

Re: Hacking on Farpointe/Pyramid 26 bit, need encoding help

Would anyone be willing to add the code for $200?  Or show me how to clone manually for $200?

You can contact me at: gm121@hotmail.com

Thanks

I could just clone or send you a sample tag with any number you want on it.  I use custom made programming software to make tags.

Hello,

I am interested to your custom made programming software. I have Pyramid information read from key fob as below details
Pyramid ID Found - BitLength: 26, FC: 150, Card: 194 - Wiegand: 12c0184, Raw: 00010101010101010101015261070889
Checksum 89 passed

Is it possible to clone using your software?
Answer here or send me email hydrorigs@outlook.com will be appreciated.

Thanks

Yes not a problem.

trazodone

Contributor

Registered: 2015-11-25

Posts: 50

Re: Hacking on Farpointe/Pyramid 26 bit, need encoding help

Hello hkplus,

Which reader to use with your custom made software?
Is it possible if I can have your software? Are you comfortable to share or sell some?

Thank you

hkplus

Contributor

Registered: 2015-01-07

Posts: 127

Re: Hacking on Farpointe/Pyramid 26 bit, need encoding help

I don't have the ability to provide this software unfortunately.